§ 8-4-142. Acceptance or rejection of result of test.

(a)

If all or the minimum designated percentage or number of the specimens tested meets the requirements of the test, then all of the pipe in the lot, shipment or delivery corresponding to the sizes and classes so tested shall be considered as complying with the test. If, however, ten percent or more of the specimens tested fail to meet the requirements of the test, or if more than one specimen fails to meet the requirements of the test when the number to be tested is less than ten, then a second selection of pipe shall be made for that test. The number of specimens to be tested in the second selection of pipe shall be five for each specimen of the first selection that failed to meet the requirements.

(b)

If 90 percent of the specimens tested, including those first tested, meet the requirements of the test, all the pipe in the lot, shipment or delivery corresponding to the sizes and classes so tested shall be considered as complying with that test; otherwise all pipe of these sizes and classes shall be rejected.

(Ord. No. 90-11, § 10, 3-6-90)